Quantum Fireball 20.5 GB Hard Drive > Search
Quantum Fireball 20.5 GB Hard Drive jumper setup
are connected properly with the hard disk to motherboad,and check the jumper setting.after that go to your bios setup by pressing del key and check whether hard disk is detected more...
here you go, a chart of maxtor jumper settings. just find your model and use its jumper settings - i will get you the exact info you need for your setup. please include which drive is master and which is slave. here more...
as you old/original HD (Primary Master), you need to move the jumper in the WD for it to be as the Primary Slave. your wiring/jumper and settings are correct, you can go to BIOS/CMOS setup immediately after powerup and determine if your PC has auto detected more...
port bule part conect motherboard ....other part conect hard drive then jumper setting conect right 6 pins ..2pins conect 1st point it call master dvd rom divice....press f10 to save yes enter reset pc then setup cd load ....... more...
in the bios setup set the internal harddisk to be the primary storage device and slave one... if you are using primary ATA disk...try changing the jumper positions.. thankyou more...
maxtor 40gb hard drive need illustration of jumpers...
mine has 3 sets of 2 then a single on bottom.
and help you could give?
thanx again dude! hay panth3on!
i tried the setup bios?...no luck yet....i used the F1 to get there? (Gateway Pent.2) more...
Back to Quantum Fireball 20.5 GB... page.
Sponsored Links
Repair Service
Find Hard Drive Repairman Near You:
= Poor
= Average
= Good
= Excellent
