Question about Quantum Fireball Computers & Internet
...DS, CS, PK, Rvsd? use the cable select pin option. as long as you have an operating system already installed and running , the cs selection will automatically recognise the add on as a slave
Question about Quantum Fireball Computers & Internet
DS, CS, PK, and Rsvd. The description of the jumpers doesnt tell you how to set the jumpers so the drive is the slave. The documentation is not available. What do you do? put the jumper on CS, and use
...DS, CS, PK, or Rsvd. please help. If you set it to CS and then plug it into the second connector it should be on the slave. The end one is always master. Sometimes you just have to do a trial and ...
...DS, CS, PK AN Rsvd Master/Slave designation is determined by jumpers on IDE drives. Most drives have adequate markings on them to identify these jumper positions. If not marked clearly, you will need ...
...CS is next pair: cable select is(master or slave) DS is next pair: drive select is(master) this is righ off the top sticker of my drive, stop laughing I know it's near obsolete but still works. good ...
...CS" Cable Select for master/slave. and last set/pair is "DS" for Master. I only have the one jumper and all configs show a vertical or top to bottm jumper. Mine is in the Slave 'cause I only use for ...
DS, CS, PK, and Rsvd. The description of the your instructor to determine the correct settings for the jumpers. During the boot process you will see on the screen to press a certain key to enter setup
...DS - Master setting 2) CS - Cable select 3) PK - Slave (park) 4) Unmarked - reserved, not used You may view this info at the following link: Quantum Fireball LCT15 Jumpers I hope you find this ...
Question about Quantum Computers & Internet
...drive I the slave on a Quantum Fireball Plus AS 20.5 GB hard drive DS, CS,PK and Rsvd Hi, Try the attached the information you need is there. Maxtor and Quantum ATA Hard Drive Jumper Settings TTID ...
33 questions posted
Usually answered in minutes!
13 Questions
