Ricoh KR-5 SUPER II 35mm SLR Camera "film advance work" Questions

Fuji film advance does not work you can advance thru a whole roll of film. The pins should engage after the 2nd pull of the film advance but it does not. sounds like the film advance motor died

Film advance lever I have a Pentax K1000 film camera and the film advance arm will not move so that i can advance the film. It was working just fine and then it wasn't. There is currently no film in ...

FILM ADVANCE/SHUTTER STUCK Start simple and go from there. I don't know if you have film in the camera so I'll read the following and choose what works for you. I will assume the battery is working if

...film advance lever and take a shot. You should see the shutter curtains open and then close a second later. Then advance the film lever again and watch to see that the sprockets are turning. If they ...

film advance is a battery necessary to move the film advance lever ? many thanks ! jc In most film cameras, a battery is not necessary to manual advance film using the lever. Your Canon AV-1 is no ...

...advance the film winder, click the shutter button, and repeat.  The two spools on the right side should turn, this is what advances the film.  If this is not happening, then there is ...

film advance lever I am unable to advance the film because the lever will not wind all the way. It doesnt move the film take up spool. How do i get the film to advance? Your camera is cocked but since

...film advance is made. Hey mikki1, One reason this might be happening is the multiple exposure lever is stuck to the select position which would not allow the film to advance. I hope this helps! ...

film. The advance lever on the case can only be pushed half way, but it won't let you push the lever the full range to advance the film. Pressing the rewind button wind the film advance lever,if it is

...film advance lever worked, shutter, even the light meter. However, as I was about to load film in, I tried to advance the lever, only moved about halfway. Tried the trigger, it wouldn't push down. It ...