Cobra 29 LTD CB Radio "replacement truck antenna" Questions

Ad

Question about Cobra Radio Communications

1 Answer

a lot of base antennas with them, just put it on the top of car in the center or trunk, or middle of cab of truck, with a good SWR and you are talking and receiving. great antenna. ...hope this helps.

Ad

Question about Cobra Radio Communications

1 Answer

...antenna cable from the radio then keyed the mic and the truck idles fine. I hope thats enough info, thank you for your time. Hello stews78bronc, First I want you to do one thing; disconnect the ...

Ad

Question about Cobra Radio Communications

1 Answer

...on those kw's. May want to try a no ground antenna. Also the stock coax that comes with the truck sometimes gets broken or pinched. Go to a good shop, replace the cheap coax and grount the

Question about Uniden Radio Communications

1 Answer

truck and antenna is mounted on passenger side west coast stile merio. I have just replaced the antenna and tried to adjust it for peak performance and the best I could get is a 3.0 reading on the Swr

Question about Cobra Radio Communications

1 Answer

...replacement. the model number is the cobra 20xtr Try H & Y electronics. Thats www.hyelectronics.com They carry ANY and EVERY CB antenna that is avaliable on the market. If you dont like ordering ...

Question about Cobra Radio Communications

1 Answer

...truck. The antenna is a wilson 5' fiberglass, mounted on a plastic tool box, as far back on it from the cab as possible. I have a ground wire running from the negative shield of the coax where it ...

Question about Cobra Radio Communications

1 Answer

...antenna Mack factory mounted coax and antennas with a new cobra29LTD Chrome. No light sitting still, red light when i move truck Mack's cophased harness just merges the two wires at the connector ...

Question about Cobra Radio Communications

2 Answers

...antenna. If the new truck has shock-mounted mirrors there may be no bond to ground if that is where the antenna mounts. the coax needs to bond to metal at the mount or the SWR will be way out. SWR ...

Question about Cobra Radio Communications

1 Answer

...antenna I had Wilson 2000 same thing. Tried using the cable already installed on truck and only RX/TX is red my guess is it's the cable that need to be replaced just wanted to ask someone else. But I ...

Question about Cobra Radio Communications

1 Answer

replacement, too.  Inspect the connector at the radio.  Make sure that the soldered joints in the connector are still secured and have not broken and caused an open circuit or short circuit.

Not finding what you are looking for?
Cobra 29 LTD CB Radio Logo

999 questions posted

Ask a Question

Usually answered in minutes!

Top Cobra Radio Communications Experts

Brad Brown

Level 3 Expert

19187 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

eradiostore
eradiostore

Level 3 Expert

1672 Answers

Are you a Cobra Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...