Question about Radio Communications
...microphone that connects to the channel button circuit, it is (electrically) between switch 5 (up) and pin 3. If this not present then it may be causing your issue, IT is also possible that the diode ...
microphone, or pulled against the wire. if the problem is not found to be any of the above I suggest you take the radio to a qualified technician for repair. First take a jumper wire and connect it to
...Microphone ok? If the radio has been in storage, the switches and knobs could have dust and dirt in them. How much troubleshooting are you comfortable with?? If your not, then you might need to take ...
...switch setting. Be sure SQUELCH is adjusted properly. Is it over-squelched? Check if the unit is switched to an operating channel. 2. If trouble is experienced with transmitting. Be sure the ...
...switch for cb/pa is set cb,knob for rf gain is at max, squelch knob is fully counterclockwise..squelch can be adjusted if ya don't want to hear static but will start cutting out weaker signals.If ...
139 questions posted
Usually answered in minutes!
980 Questions
274 Questions
141 Questions
112 Questions
75 Questions