Question about Cobra Radio Communications
...rx/tx green light stay on all the time? Cobra 29LTD Yes the light will stay on and change when you key the mic rgreen light is the reciver light yes it stays on re is when your radio is transmitting
Question about Galaxy Radios Radio Communications
My mic keys up by itself all the time and will stay keyed up until i key up again. tried 2 mic's and still does it. any solutions? Replace the Keying diode. you can sub it with two 1n914 in series..
Question about Galaxy Radios Radio Communications
galaxy dx94hp...stays keyed up all the time without touching the mic and even removing the mic completely. key up the mic and it squeels like a pig. check the mic connector internally its probably ...
radio stays keyed up with no mike .what would cause this.its a galaxy saturn some radios will stay keyed on without a mike. plug one in and see if it unkeys
Question about Connex Radio Communications
connex 4600 turbo radio stays keyed up even with mic disconected Bad RX/TX Transistor? I don't have a diagram for the 4600. Sorry!
when i key the radio it stays on rx does not tx Sounds like you have a broken microphone wire or a bad mic switch.
Question about Galaxy Radios Radio Communications
...radio some time my receive stay stock on s9 then i press the ptt again and go back to normal s3 why is that. Either a dirty meter, erratic ground problems, high swr's internally on the meter, put a ...
Question about Cobra Radio Communications
my 360 stays key up all the time on ssb can you help as above Try pulling the mic out to see if it stops if it does you have a problem in the mic if not it is inside the radio. Good luck
Question about Cobra Radio Communications
cobra 148 gtl stays keyed up on tx on both am and ssb i have a cobra 148 that stays keyed up on am and ssb even when you remove the mike...have already checked tr21,tr22,and tr23 they are ok any ...
Question about Cobra Radio Communications
...CB wire strait to the battery, and see if it stops. If not, Radio Shack sells a noise limiter that goes in line with your connection, don't know how much. Do you have your noise limiter or noise ...
139 questions posted
Usually answered in minutes!
980 Questions
274 Questions
141 Questions
112 Questions
75 Questions