Cobra 25 LTD 40-Channels Base CB Radio "anntena" Questions

how do i cut a cb anntena calabrateing a cb radio anntena too short or too long if you are talking about a fiberglass antenna without a tuning rod then you take about 1/4 " off at a time and recheck ...

how do i cut a cb anntena to calabrate it? cut a cb anntena how do i do it? If the antenna was designed to be used on the CB band, you should NEVER have to cut it.  Calibration is a matter of ...

...radio I have a Wuiden(madison) corp base station. When i first hooked it up to my Halcon 22ft base anntena it worked greast. I could hear a frien from far away at the same db with no prob. Then one ...

How to Eliminate Static in the uniaden pc68xl Iam running a wilson lil wil anntena ditch the wil and invest in a better antenna wilson 500 or 1000 thoes wil's dont seal in the rain and your swrs go ...

...If so then you can go to any radio shack and buy a signal booster that hooks up through the anntena

...bad. I have changed the mount, the coax, wired directly to the battery, run a ground wire fom the anntena and nothing works. the noise goes away when the brake is applied and it varies with road ...

...there is also a squealing sound. I have checked all the connectors and I am using a ft fiberglass anntena that is hooked to the mirror of my motorhome. The radio is only a year old and has only

...increase the sound, however this might also be a sign of poor reception which would indicate a bad anntena, poor grounding or coaxial cable. Check and or replace these items before continuing. If ...

...diferent bands, ask for a radio check, see what happens. IMPORTANT NOTE: make sure the SWR on your anntena is below 2, and innitially use the radio on LOW RF Power. If you SWR is above 2 you WILL ...

Cobra XL 29 Anntena Warning Light Radio worked fine to start with but I have a anntena warning light when keying the mic and radio will not transmit If you have a SWR meter.put meter in line with coax