Cobra 148 GTL 120-Channels Base CB Radio "cb frequency counter" Questions

...frequency counter you can find the CB this way. If its in a mobile, or you are not really far from a highway where big rigs travel, you can flip to channel 19 on the channel sellector then flip ...

...POTS DO I NEED TO ADJUST? THANKS. You'll need to connect Frequency Counter to C252 & adjust: USB Frequency: 10.6975Mhz adjust L126 in receive mode LSB Frequency: 10.6925Mhz adjust L127 in receive ...

...cb frequency drift problems i have a galaxy dx 2547 cb radio it drifts in frequency during warm up on receive , it takes about half an hour to settle down . it also drifts in frequency after ...

my uniden pro510xl transmitts slightly off frequency. Is there an adjustment for this? Yes, you need a frequency counter to get IFfreq back were it needs to be. google cb shops in temple, tx

...CB, turn all way to left (a/e) Mode Switch: Selects how you modulate the radio. Normally, you will operate on AM, USB or LSB. Fine/Coarse control: Changes the frequency you operate on. Normally, set ...

...CB channel 19, the frequency counter will read 27.1850. If band A channel 19 is not 27.1850 then leave the channel selector on 19 and flip through the band letters until it reads 27.1850. once you ...

...frequency counter reading 26.965 mhz on band E. ( channel 1 ) Now you have to adjust VR 1 for 26.965 mhz if its not reading it already . Now set the counter and the radio to 27.405 mhz ( channel 40 ) ...

...frequency counter to tell you what freq you are transmitting on there is another way. Turn to channel 19. mess with the switches untill you hear truckers on the highway. then you have got it. ...

...Frequency counter only useful on other than sideband operation. This does not mean the carrier insertion osc. is on frequency. If it needs adjustment, your voice will sound high/ low on transmit. ...

...frequency counter board in a DX-959 from loosing contact and making the display stop working? You may have what we call a bad solder joint or a problem with the connection point from the counter to ...