Makita 33cc Chain Saw w/16" Bar DCS34-16A "dcs34" Questions

What should the compression be for the makita dcs34? As far as i am aware it sould be between 60 - 80 PSI, 40 - 60 psi indicates ware any lower than 40 no hope

how do you set up a carb on makita chain saw You provide no manual, I chose a "DCS34" a link follows: http://www.makita.ca/data/upload/tools/DCS34%20F-E.pdf It lists no starting point for the "H" and

Makita DCS34 chainsaw After a period of use ( this varies from 15 mins to 90 mins) the saw will tick over but will not rev ( just as if it is running out of fuel) also the priming bubble sticks in ...

I need an instruction manual for makita chain saw DCS34 you can purchase one from store.payloadz.com most manuals cost $ 8.99. hope this helps

what is the correct petrol/oil mix ratio for my makita dcs 34 chainsaw? 50/1 Here is your manual. http://www.manualnguide.com/dl/10083/

what size file do i use to sharpen the blade of a makita dcs34 chainsaw? It has a 3/8" 050 low profile chain, so you need a 5/32" round file.

DCS520 PETROL/OIL RATIO WHAT IS THE MIX OF OIL TO PETROL 40 to one is a good mix

The engine starts but will not continue running - feels like fuel starvation. Have cleaned carb, spark plug, fuel lines, filters, etc., Any ideas? thanks in anticipation John I had the same problem ...

...vibrated off its setting. CLICK BELOW FOR MANUAL http://www.makita.com/en-us/Assets/Images/Products/DCS34/owners_manuals/995700534.pdf Hope this helps you, RSMITH972278 P.S. CONTACT ME FOR ANYTHING ...

how do i check ignition coil on makita dcs34 no spark need to check ignition system ,diagram would be helpful Remove the plug leave it on the wire check for spark plug must be grounded.