Dell (Inspiron 531) PC Desktop "tower powering monitor start" Questions

...tower runs and never boots to monitor...Monitor is good....checked all the power up cords...The tower never boots up....only one year from purchase...Been told it needs a new motherboard...but what ...

...on the Back are all Green then the monitor itself appears to be the failure point. See if issue occurs with a different monitor. If the tower LEDs are not all green, then reply with the ...

...monitor, tower, and sterio receiver plugged in it) from wall then moved the table with all of them on it to different wall plugged power box back in which the receiver was on and started playing FM ...

...tower) including keyboard, mouse, monitor(everything)..even the power cable Now keep on holding down the power button on the computer tower for 15-30 seconds.. Now release the power button, plug in ...

...monitor, tower, and sterio receiver plugged in it) from wall then moved the table with all of them on it to different wall plugged power box back in which the receiver was on and started playing FM ...

...and will not start Do this way 1.Discoonect all the cables from the tower 2.Press and hold the power buuton for 30 secs. 4.Now connect only 4 cables i.e.monitor,power,keyboard,mouse 5.turn on the ...

...tower will start up. Monitor immediately says "monitor going to sleep". Screen goes and stays black tower will not shut down from power button so I have to unplug it. Is this a power supply issue or ...

...monitor Hello Michael, It's most likely that your ram is bad. Power down your tower and UNPLUG it. Open up your tower and see if you have duel channel ram. if so, take one out and restart your ...

...tower I have is a Systemax Venture. The montiors I am trying are a dell, a philips, and a HP. Can you give me any ideas? if the monitor goes into standbye when you plug it into the computer , it ...

...tower, so it has nothing do withur computer monitor(computer monitor is working fine), there is some problem withur computer tower. ii) now try removing all the physical connections going to computer ...