Garmin StreetPilot C330 GPS Receiver "touch dot" Questions

...Touch the dot and another dot will apppear, now touch this dot again, keep doing this until the unit reboot. If you touch the 1st dot and nothing happens then the digitizer on the LCD is dead. If the ...

...Dot" Accurately touch the dots as they appear The dots will change location A stylus or pencil eraser may be used to accurately touch the dots Touch OK when the "Calibration Complete" appears The ...

...as blurry...can't see anything..but it talks...able to press on screen blind. Try recalibrating the touch screen. Turn on unit while continuing to press the power button for about a minute. You will ...

...you to Press dot in the lower left corner. 4. Release the Power button and touch the sequence of dots until your unit displays, Calibration complete. 5. Your unit should now function

...dot in the lower left corner. 4. Release the Power button and touch the sequence of dots until your unit displays, Calibration complete. 5. Your unit should now function normally. I hope this helps. ...

...touch screen. With the unit off press and hold the power button until the calibration screen appears (approx 35 seconds). The follow the instruction on touching the dot on the screen. Once this is ...

...dot as it moves around the screen. Once thisw is done your touch screen should work. The screen on your model is a touch screen. There is a micro transparent membrane in the screen that is sensed ...

...touch the dot that comes on the screen about four times and then you will be able to touch all keys when completed I corrected my problem. It was a pain, but I pulled the thing apart and cleaned the ...

Screen Calibration problem with SteetPilot c330 Recently began experiencing problems with the touchscreen not responding accurately to touch locations near the top of the screen. In many cases this ...

garmin c330 when it is turned on i get the screen that says "where to" but touch screen does not work, its like its frozen.please help. its just out of the box today Try turning the unit off, then ...