GE 24GP653 24" TV broken connector

Radio Shack MIGHT have the part. That little box was the connector assembly and is soldered on to the circuit board. You will need to unsolder the broken connector and solder in the new one. Either that or duct more...

  GE 24GP653 24" TV - Troubleshooting

• Rate this result:
• = Poor
• = Average
• = Good
• = Excellent

it a hundred times. A peep will simply hook up a connector to the set and ground the connector or what looks like connector on one end and soldering the center wire onto the broken wire that came off the connector and then soldering the outside more...

  GE 24GP653 24" TV - Troubleshooting

• Rate this result:
• = Poor
• = Average
• = Good
• = Excellent

As long as the PC board inside teh tuner was not broken, the "F" connector can be replaced. This is a relatively simple repair for a more...

  GE 24GP653 24" TV - Troubleshooting

• Rate this result:
• = Poor
• = Average
• = Good
• = Excellent

Sometimes the tuner has a component defect, or the coaxial connector can be broken. more...

  GE 24GP653 24" TV - Troubleshooting

• Rate this result:
• = Poor
• = Average
• = Good
• = Excellent

Cable Connector inside TV My cable connector on the tv has been destroyed. connect cable. How and what do I use to replace the broken one?? more...

  GE 24GP653 24" TV - Troubleshooting

• Rate this result:
• = Poor
• = Average
• = Good
• = Excellent

1st check RF antenna pin, is it broken? does the antenna wire is connected propery? 2nd check RF pin connector at rear side of your TV, is it OK? If every more...

  GE 24GP653 24" TV - Troubleshooting

• Rate this result:
• = Poor
• = Average
• = Good
• = Excellent