...it on one day and boom, it was like that. The sound works great as it should. Any suggestions as to what could be the cause and how I could go about fixing this? needs stk packs what is stk ...
...the button on the front......what could be the problem this may need a small signal module and or stk ...
...possibly be the convergence amplifier. Any thoughts? try and run the convergence if that doesnt work you may be looking at some bad stk packs they arnt very expensive but they arnt easy to ...
...stk packs no voltage feeding the stks. I had a problem with my TV colors not lining up. One day I turned it on and the green was out of wack. I checked this message board and replaced the STK chips, ...
any ideas?? thank you stk convergence packs may haqve failed in the dead short mode stk392-110 removing them from circuit may allow the set to turn on again good possibility do you know how to solder
My tv looks like the red and blue colors drooped like 2in away from each other now looks like a 3d cyan and red comic book. what can I do to fix it? convergence is off. replace stk packs
...STK packs. These ICs control the voltages that go to the picture tubes being projected. There are 2 of them, both should be replaced at the same time. RCA got bought out is owned by an overseas ...
...STK packs in your TV, this is what controls your convergence,it should be two big IC on big heatsink and number should start with STK- ______,just replace these STK packs and you can order these from ...
stk packs and the associated supply resistors cant miss em three 10 ohm 1/8 watt in parallel justt had one that i had replaced only of the two packs with a higher current stk pack ie; stk 392 -120 150
...of the brand. It is caused by a failure of the convergence circuit. In particular, there are two STK IC chips, sometimes three depending on the model, and these are power amplifiers that drive the ...
98 questions posted
Usually answered in minutes!
588 Questions
237 Questions
99 Questions
101 Questions
60 Questions