ICOM Informatique IC-F121 VHF 136-174MHz mobile 128Ch 50W Microphone "radio mobile" Questions

what kind of progamming software do I need for my Icom F121 VHF radio You should use the latest software Revision 1.7 and download from ...

Dears, we have CS-f100 software Ver. 1.6, but during programing VHF radio ICOM IC-F111, message appears "Please update to the latest version" Can you send to me the updated version of this ...

...gt;>Secutity Change Set Mode Access : Inhibit to Enable4- Enter RX TX frequency and write to the radio.or you can download version Rev 1.7 from ...

jumpered for PTT and mic audio? To use OPC-617 option cable:1- open your CS-F100 Rev 1.7, read your radio.2- click on Common >> Expert >>EPTT/FTSW change to EPTT, 3- On the main board

...default as follows:Open your CS-F100 software, enter RX TX frequency below, and write to the radio.Ch1: 136.100 MHzCh2: 155.100 MHzCh3: 173.900 MHzFor F221 Enter RX TX frequency belowCh1: ...

...radio mic frequencies have been reallocated for mobile phone usage world-widepredominantly these affect Channel 69 (854 to 862MHz). These are mainly the paid for licence frequencies. ...

ihave an old icom icm- 55 marine radio what ariel do i need and do i need to swr the ariel will a cb ariel work basically what do i need to do to get it working All marine VHF radios must be licensed.

...mobile radio transmitter as used with two way radio for the cops, ambo's, firies,or even a nearby Cab!! Some times faulty light dimmers can also spray RF. To what ever end, the fact that 4 mics went ...

...mobile phones and any other radio operated equipment that is not needed Turn the trim control on the transmitter to the maximum output that you can without causing distortion. The stronger the ...