getting power to my AMP but no power to the subs. I tested my AMP and subs in another car and everything worked so I know my hardware all works fine. I had someome test the connection of the wiring to
Question about Kenwood Car Audio & Video
...getting a new Kenwood head installed and have a question about amps. The unit has a 50W X 4 internal amp. I have an amp for my sub and one for my mids and highs installed already (not sure of the ...
Question about Pioneer Car Audio & Video
...power for the amp, it runs to the vehicle battery and should be fused as well at the battery and at the amp. Then check your ground, it should be to the floor, not a seat bolt or rear/side/ wall, the ...
power from it to the amp. The amp is good and the subs are good have you got a wiring kit for the amp? the amp needs atleast an 8 guage tho id suggest a 4 guage running from the batter to the amp with
amp gets power when the radio is on, cuase the radio is sending a signal to the amp (thinking that it is sending a signal to the antennae to raise) you do have one of those collapsable antennas, right
...his car. i dont get it. any suggestions???? you are probably mising to power on the factory amp from the vehicle but if the amp isnt powered on, how does it play during the radio? I have the same ...
...is soundstream Vir-7011NTB Yes, You will need an Amp for this Settup. Check the Rated Power of the Subwoofer and Get an Amp that will Supply this amount of Power. Please Rate My Response!
Question about Jensen Car Audio & Video
...like that will never match. You will want to run only one sub or get a bigger amp. But for that amp a standard 6 gauge power wire will be sufficient to run it. The ground wire about 4 gauge is
...power but no sound. Is the bose amp prewired to the harness for power and ground? Id call you local stereo shop. I changed the head unit out in my old acura legend and had the same problem. You need ...
Question about Pyle Car Audio & Video
...for or current looking for the remote wire. This model has a blue wired that should be labeled power antenna this is the remote turn on wire. This is what you need to run remote power to your ...
157 questions posted
Usually answered in minutes!
481 Questions
44 Questions
31 Questions
26 Questions
6 Questions