Kenwood KAC-X201T Car Audio Amplifier "stereo cd remote" Questions

...cable is for the power remote, that cable go on the amplifier to the stereo. remote wire its the blue one some have blue with lil white line on the wire its on the back of the cd player on the ...

...cd is powered on.Hope I have answered your question. Click on the link below to view the original owners manual to your Kenwood surround sound stereo system: ...

...system control wire get hooked up tooo?????? it's just a remote wire it goes from your amp to the car stereo. usually on the wire harness for your cd player the color is BLUE but it should be

...do it this way)..........or you can hook up the blue wire from the back of your CD/DVD unit what ever you are using and every time your stereo turns off your amp will too.......... hope this has ...

...CD/DVD dash device. If the output on your car stereo is no longer providing power to the remote switch output, look for other things that only have power when the car is on. The currend draw to the ...

...stereo on the radio the sub amp and everything work just fine, but when i turn it on the cd function to play a cd there is no sound coming from the sub like the amp has completely powered off. i ...

cd player how can i hoo it up you can use your rear speakers get a wire to run from the speaker to the high input in the amplifier the then hook up the power to the am and find a good ground then need

...cd player assuming you have an aftermarket stereo installed, the remote wire for the amplifier is usually connected to either the red: live 12v or yellow: switched live (only live with key turned to ...

Which wire do I hook up for my stereo memory its the yellow wire, hope this helps

amp will not power up. wired to battery, grounded, rca to stereo. what could be wrong? remote wire from cd player needs to be hooked to amp also