Kenwood KAC-9152D Car Audio Amplifier "amp put channel" Questions

put my old amp in place and every channel works. I tried swapping all the RCA channels and and speaker channels around. Only channel 1 plays any sound. I then bought a second unit, from the same place

channel amp that ive had for a while and i hooked it up today-1 channel puts out sound with 1 sub and the other channel makes the other sub flex outward with no sound. wires to this sub get hot and so

...was trying to run my sub out channel 3&4 and i hooked up my rc inputs in the channel 3&4 and put my sub bidged out of channel 3 & 4 and it just dont put out sound Do any of the channels produce

...amp is being used. That channel has a blown fuse. have you tried running + and -, + and - to both channels to see if both subs worked? If one sub doesn't then it's a blown fuse or scarred fuse and ...

...put them into the negative spot on 1 side of your amp. Assuming you have 2 subs, connect them 1 to each sub and be sure they are on the negative sides of the subs or both are on the same side of the ...

...amp.Starsound SSA-4495.1500w.95x4 at 4ohms.175x4 at 2ohms stable.chrome chassis.i live South Africa.it didn't die while playing.It died when i put it back on.Was playing fine with the last run but ...

...amp be bridged and if so then how. i would honor ur input. hey mate try putting your positive on one channel then put the negative on the other channel. So plus on 1 channel an negative on the other ...

...amp. If you got two 500 Watt subs then you got to find an amp that can put out 1000Watts anything less wont sound good and may burn out the subs because of too much distortion cause of lack of

...amp, would it be best to put it on 2 channel mode and bridge the 2 channels to the sub? My sub is a pioneer 12" 150W RMS and 800W max, does anyone know how much power would go to sub if I used the ...

...put wires from my pioneer stereo to the amp input and ran my own wires from my speakers to the amp. I plugged everything in and encountered a problem. The rear speakers work just fine when I plug the ...