Kenwood KAC-7202 Car Audio Amplifier "9152d remote" Questions

remote for kac-9152d i have this awsome amp but no way of using it. because i have no in line remote for frequency or volume. would a KCA-WR10 in line remote work on my amp or were can i find one that

...9152d' kenwood 1800watt amp, pushing 2-12in pioneer subs in my car, everything is wired up properly. voltmeter is reading 12.6 volts to the amp, fuses are good, but no power light and no music is ...

I have a 1800 watt Kenwood amp. It has power the power lite is on,but the lite for the remote turn on is not.check power on blue remote wire 12volt. Check your amp's fuse(s), it may be blown.

kewood 352u headunit to kenwood KAC 9152D amp. Which wire do i use for my remote wire? the blue wire or the blue/white wire? blue

...9152D Amp is hooked up to power and wont turn on.No light no nothing. Power going to it is good though. Check your ground. Make sure you sand off any paint where you grounded the amp. Also did you ...

...9152D Car Amp Ok my amp has been working fine till today and it just shuts off. I know the amp is fine because I replaced it with an amp that I know is perfect and it did the same thing. See my ...

my amplifier goes right into protect when the power,remote,and ground wires are hooked up i didnt even get to hook up the speakers which are a 2ohm load what the problem and how can i fix it?thanks If

when i hook up the remote wire it makes my power wire go to 4 volts the power wire says 12 volts until i hook up the remote then it goes down to 4 volts......very weird If the battery is strong enough

amp will not turn on ,it has power to amp and power to p con, and it is eathed. i have checked fuses and they are ok. make sure to double check your remote wire and to see that it is connected ...

...9152d and it doesn't have the bass remote control. Will it still power up and work without one ? Where can I buy a remote for my amp too? Thanks, Jason It will work without the remote and the remote ...