Kenwood KAC 6201 Car Audio Amplifier "rem mean" Questions

Ad

Question about Rockford Fosgate Car Audio & Video

1 Answer

what is rem rem means remote on the amplifier which means your amp will turn on when ur radio turns on the remote wire goes from the back of the stereo usually always a blue wire to the rem on the ...

Ad

Question about Rockford Fosgate Car Audio & Video

1 Answer

... do you have power at the inputs? Check with a voltmeter or continuity tester. If so, do you have a remote wire connected to the REM lug. A remote wire brings a low amperage signal, usually from the ...

Ad

Question about Eclipse Car Audio & Video

2 Answers

...mean the remote wire connection at the amplifier? generally people run the wire to the wiring harness behind the stereo and tap into the radio's ignition only power wire. if you have an aftermarket ...

Protection light is on my REM 4300 planet audio amp That means that 2 wires must have touched and the protection light came on to prevent further damage.. There is usually a reset button somewhere on ...

Question about Sony Car Audio & Video

1 Answer

...you're not running a 2 ohm sub to a 4ohm amplifier. Also check your wiring, check the Rcas and the REM

Question about Sony Car Audio & Video

1 Answer

...rem (14.25 result) Does this mean that the amp is blown or is there any thing else that I should try? sounds like the amp gain is too high, grounded incorrectly, or the amp is bad. the ground wire ...

Question about Rockford Fosgate Car Audio & Video

1 Answer

... i have a problem with my RF P3001 amplifier.. i hook up the Pwr wire, the Grnd wire as well as the rem wire.. and tata ! the RF swirl as they call it, lights up which means im getting my power ...

Question about Sony Car Audio & Video

2 Answers

rem (14.25 result) Does this mean that the amp is blown or is there any thing else that I should try? Protection Circuit is bad. It needs to be serviced. If all speaker wires are disconnected and it's

Question about Legend Car Audio & Video

1 Answer

...inline fuse near the battery don't connect to the battery until installation is complete. Run the REM to your stereo power ant. Wire. if available. Run the GND to Metal Chassis Ground keep it as ...

Question about Kenwood Car Audio & Video

2 Answers

...REM wire. Here's some things I've done. Disconnect the REMOTE WIRE and it still runs no problem other than it's too hot to touch! Next I disconnected the GROUND to shut it off and obviously it turned ...

Not finding what you are looking for?
Kenwood KAC 6201 Car Audio Amplifier Logo

8 questions posted

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5013 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

Mike Duncan
Mike Duncan

Level 2 Expert

219 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...