Kenwood KAC-9102D Car Audio Amplifier "2ohm stable" Questions

...2ohm stable. I'm getting a cvt12 kicker that is 400rms 2ohm will this amp be good for 2 kickers Depends on how you connect the kickers. If in series this would work, if not it will damage the amp. ...

...2ohm stable. wow sirrex43 please state the obvious for us all! who asked if the amp was 2 ohm stable?..........knowone ! the guy wants to know if he can push 1 ohm , geeeeez anyway mtx is known for ...

...can you tell me if it is a fried cap or something i believe your amp is 2ohm stable so be sure your speaker are wired for a 2ohm load or higher anything below 2ohm would throw the amp into ...

2ohm stable Yes you can, but they must be wired in series only. This will give you a 4 ohm load. If you wire them in parallel it will give you a 1 ohm load which may be too low for your amp to support

Is a boss audio RIP 695 amplifier 2ohm stable on bridged mode? no, it is 2 ohm stable in stereo for 700x2. the 1400 b ridged power assumes 2x2 ohms=4 ohms bridged @1400 watts

...2ohm stable??? http://www.rockfordfosgate.com/scripts/rightnow.cfg/php.exe/enduser/fattach_get.php?p_sid=N_hfpSOj&p_tbl=9&p_id=340&p_created=1083781892 It's not 2 ohm 'mono' stable. The ...

...2ohm SUB WOULD IT WORK OKAY WITH A JL AUDIO 500/1 V2 AMP OR SHOULD I HAVE BOUGHT THE 4ohm INSTEAD? It will work fine. This amp is stable to 1.5 Ohms, but is designed to put out about the same amount ...

...to 2ohm and use each channel separately. So i'd recommend buying a 2ohm stable monoblock or running it at four ohms. a 1400 watt amp'll still pound at 4ohms and it'll extend your amp's life ...

...2ohm stable, but i dont know how to get the 2ohm stable setup. Kinda confused The 2 ohm stable rating on the amp is PER channel meaning that you could effectively hook up a 2 ohm speaker or a 2 ohm ...

...Stable @ Mono if you have 2 12s just bridge them and you will have 650wrms at 2ohm running to them or one sub at 4 ohm 500w rms ps they should pump iam running 2 12s with just 360rms at 2ohm and they ...