Kenwood KDC-217 CD Player "amp low volume" Questions

...amp setting is on low. What you need to do is:* Press and hold the "Sel" button, located next to the mode button, until you enter the secondary audio menu displaying "L/O Mode"*Press the Track Skip ...

Amp gain I swapped batteries. My radio will now go only to 30 on the volume setting. How do I change this to high? int he deck settings if you change the output to high you can get full volume, you ...

...WHEN USING ONLY The same problem No answer ? are you running low level to an amp??? if so you probably have the remote from the amp hooked up to the power antenna wire instead of the amp remote

...low fequency noise from the sub to match. But, if your bass overpowers the rest of the sound you will need to put an external amp to your mids/tweets Or just down the bass amp to equalize the lows to ...

...amp grd" ,the code only shows up when you go to turn up the volume other than that it seems like it is working but without the sound? check your wiring for shorts or nicks, you may have a bad speaker ...

...it with three sets of pre-outs. On the positive side, the line voltage level resistance on those outputs is relatively low (55 ohms), so this unit will provide a good amount of gain into a given

...amp guard" the manual say to reset it but that dont work Other sites I've read about this problem suggest that first you try checking the wiring to the speakers for a fault to ground OR you have ...

...VOLUME UP. THIS STARTED HAPPENING WHEN I HAD A DVD PLAYER, EQ, CROSSOVER, AMP FOR BOTH MY HIGHS AND LOWS AND 4 12'S. I THOUGHT IT MAY BE THE RADIO SO I BOUGHT A USED ONE WITH THE EQ AND CROSSOVER ...

...amp etc.... I have removed the face plate and hit the reset button. I have hit every conceivable combination of buttons on the face. No radio... If I insert a cd, it will play, but at a low volume ...

...low on it.if you are running an amp tho, check the amp wattage,it might not be powerful enough to power the speakers.and you would need to step the amp up , if the amp is a 100watt rms remember that ...