Kenwood KDC-2011S CD Player "balance control" Questions

...balance and fader are all accessed by pressing in on the volume control knob. Press and release repeatedly to select the various functions, then turn the knob to make adjustments. An owner's manual ...

...BALANCE AND TREBLE Step 1:Press and HOLD the A.ADJ (Audio Adjust) button for 1 sec. to enter audio control mode. Step 2:Press either FM (or AM) button to select the mode you wish to adjust. Keep ...

...balance etc But then I found this, "Rotary Volume Control: The CD receiver uses a 7-way rotary volume control that increases and decreases the volume of the stereo from 0 to 35. The rotary knob also ...

...and when i switch it on a message saying offset appears and i have no power to my rear left speaker, please help. try changing the balance control, as offset to me would say the balance is one

...Balance, Fader and back to Volume. When adjusting audio functions, the unit will automatically exit audio control mode after five seconds of inactivity If you need the user's guide, click her to ...

...else. When the rear output setting is "rear s/p:SW", you cannot adjust the front rear spreaker balance. Go to the rear speaker output from function and select "rear

...together by color, you can turn the raido on and hook one speaker up and then use the fade and balance controls on the radio to figure out which wires go to which ...

how come when i push the "A-M" button to use my sound controls all i get is the balance and the fader? no bass and no treble You can only use bass and treble if your Z-Enhancer is OFF. If it is on ...

My cda-9887 does not have a bass/treble setting. Only fade/balance In the initial stage of the set up your 9887 the stereo is set with an Equalizer (parametric or graphic), Until you use the Imprint ...

...control Press and hold the INTLZ button for at least 3 seconds. Notes: • Initial mode is "SUBW OFF." • Set to "SUBW OFF" unless the subwoofer is used. • When the subwoofer is turned on, the subwoofer ...