Kenwood KDC-MP728 CD Player "reverse wire receiver" Questions

...reverse wire need 12vdc to make the dvd player function. This is for an xo Vision XO1930. no im guessing that you are asking this because you cant be bothered to strip the car down for one wire? i ...

reverse light wire and the parking brake wire the parking brake wire just needs to go to a ground other than the ground for the deck and the orange reverse light wire you shouldn't have to worry about

...wire that becomes "hot" when the tranny is in reverse. Use a multi tester Positive lead in the switch socket, negative lead to ground. The wire you want is the one that has voltage in it when tranny ...

...wire connected to the reverse light as well so it knows to turn the video on to the feed from the camera. hope this helps.I have had much more luck on www.the12volt.com for car audio and video

navigation map is flipped navigation map is reversed The radio's reverse signal wire is not connected to the gear box.

...you the positive wire.  if it pulls in the polarity is reversed and you need to reverse the wires. do not send the battery voltage back up to the headunit you will blow a channel in the

...wire Pink-----Reverse detection Wire White----To the car speed signal harness Green----Parking sensor wire PS.Att.Do not cut off the holder marked "S SENS" it's containing a protection diode.Doing so ...

if there is no memory. It sounds as though you may have the constant and switched power connections reversed. The yellow wire from the Pioneer head unit has to be connected to a constant power source,

...Oh and as for the reverse light wire. That one you will need to wire in if you're going to use the optional reverse camera that they sell separately. Hope this helps, don't forget to click fixya!

...off. There's a wire in the head unit harness that's meant to be connected to the vehicle's reverse light wire. If you don't have a rear view camera, this wire should not be connected to