Kenwood VR-6060 6.1 Channels Receiver "transistors" Questions

the type of audio power and the number on onkyo A917 amplifier Hi Usually there are 2 transistors for each channel, if you don't know the numbers on the transistors. there is another way to get as ...

...3105 Unit tries to come on but after a few seconds power LED flashes red. (Unit shuts down) I found transistors Q1015L and Q1035L in the output circuit shorted. However, replacing these transistors ...

sherwood rx-4105 output transistors I am looking for output transistors for this stereo,one is b2510,the other d1510.Have had no luck,are there any crosses? Thanks,Alex. You can also use 2SD2560 and ...

the transistor of my pioneer sx-203.i remove my power transistor so that i can replace but it lost...i dont know the code of the power transistor or the main transistor. Tell me the board no or ...

Marantz audio amp. How to set quiescent current on output transistors Hi, quiescent current is set with a diode string located far away from the output transistor high miller compensation cap values ...

...in one of the power amplifier channels. In that case, you will need to replace the speaker driver transistors in that channel. I don't have service information on your particular model; it may ...

Alpine 605 digital amp, watched wrench slip and cause big spark next to positive speaker wire out put, amp reads CUR, ive tried rebooting, unplugging ALL conects , still wont run just flashes CUR any ...

...Sony reciver say protect when i put it louder than 21 The amplifier stage, which consist of power transistors, is experiencing an overload. Possibly due to the transistors breaking down or the DC ...

if the transistor problem where i get it?if i dont find the original transistor then what can i do? Transistors are transistors regardless of the make of equipment they are in. Printed on the ...

...I have to fix it. I don't want to pass it away. Look for a large aluminum heat sink with the output transistors bolted to it. You should see anywhere from 4 or more large transistors bolted to it. I ...