Memorex MT1134 13" TV "record cable using vcr" Questions

...cable modulator to the DVR and then to the TV to be able to view and record. If this is done you will be able to watch what you are recording. When you are not recording, the signal will go through ...

...Cable/ANT INputs). With this method all 3 can receive TV signals, both the VCR and DVD-R can record (even simultaneously) and you can switch watching one program on the TV, while recording another ...

...cable from out on vcr to tv.  Have tv on 3 or 4---most sets have slide switch on back of vcr.turn both on and use vcr to change channels if you want or to play or record a movie.   If ...

Using a VCR with it. Hi. I just got a used RCA. No manual of course. I have the cable connected to the VCR, but can't figure out what station to put it on to see the movie. The usual 2, 3, 4 don't ...

on your TV. Alternatively, you can hook one from your cable box to the "in-port" on your DVD/VCR, and one from the DVD/VCR to the TV. In this case you should be able to record programs from your tuner

...record from digital stations? RE: RCA DTA800B1 Box Converter; RCA 1991 Standard TV; and Sanyo VCR Model VMM-710 Basically, you cannot use the coax connections for both the VCR and the RCA converter ...

...cable TV, so I know my TV will be fine once the Big Switch happens. But my VCR is analog, too, and I can't get a positive answer from anyone when I ask if I'll be able to use the analog VCR (which is ...

...record with your vcr, you need to put the source coaxial,(From wall), and put that to the input of your VCR, it may be in the input of your tv, so you would take that out and put it in the vcr, and ...

cable. From your VCR (Left & Right audio out)connect your left and right audio connections (White and Red) to the Audio in of the TV (Left and Right). Whith this setup you should be able to use the TV

...record from the cable box if you want to tape a show. (Note that with this setup, you will always set the VCR to record on the channel (3 or 4) the cable box output is set to. You do your channel ...