Midland 1001Z 40-Channels Base CB Radio "receiving modulating" Questions

Ad

Question about Radio Communications

1 Answer

Transmits and receives no modulation out Shows modulation on radio meter but no audio coming out I am not an expert but I think there can be little or no modulation of the carrier wave unless there is

Ad

Question about Cobra Radio Communications

1 Answer

...distortied, Most signals appears to be overmodilating with normal volume. When the signals you are receiving are too strong "over-modulated" turn back your RF which will turn down the sensitivity of ...

Ad

Question about Midland Radio Communications

1 Answer

will not get good recepiton. Hi stormnorm157, Much of the time this is caused by problems in the antenna system. Make sure there are no shorted or open connections in the coax or PL-259 connectors. ...

Question about Radio Communications

1 Answer

Why is there no transmit modulation? I have a unidentified Madison am/ssb base station with digital clock it transmits fine receives fine shows modulation on radio meter but no outgoing modulation ...

Question about Cobra Radio Communications

1 Answer

cb problem have a cobra 19dx iv with a 2ft magnet mount cobra antenna swr is good, receive is good, but muffled output Hi and welcome to FixYa, Which output is muffled, transmit (modulation audio) or ...

Question about Cobra Radio Communications

1 Answer

no receive cobra 29 ltd classic radio transmits and has modulation. the IC # 4 is blown. It has a short on # 1 pin .Which components feed power to the # 1 pin? Hi and welcome to FixYa, Initially, pls ...

A uniden Madison base station with digital clock that transmits and receives but has no modulation I have changed audio chip and tried different mice but still no outgoing modulation but meter on base

my Panasonic center module wx ct-2010 is receiving some radio channel frequency wx-ct 2010 centre module is recieving radio channel frequency when a car is at drive thru need to put a filter on the ...

Question about Connex Radio Communications

1 Answer

...that the chipset you are referring to is an ic chip audio or pll which must be working if you are receiving audio. Check your mic cord................ transmit and modulation and even your receive ...

Question about Uniden Radio Communications

1 Answer

Why no modulation in transmit mode? I have a uniden Madison am/ssb base station with digital clock it transmits fine receives fine shows modulation on radio meter but no outgoing modulation from radio

Not finding what you are looking for?
Midland 1001Z 40-Channels Base CB Radio Logo

144 questions posted

Ask a Question

Usually answered in minutes!

Top Midland Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1672 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Midland Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...