Midland 1001Z 40-Channels Base CB Radio "adjust swr antenna" Questions

...adjust the standing wave ratio(SWR). 1. Turn on the CB. 2. Set S/RF/SWR/CAL to CAL. 3. Key the Mic and rotate SWR CAL so the meter points to CAL. 4. Unkey Mic. 5. Set S/RF/SWR/CAL to SWR. 6. Key Mic ...

adjust the SWR or how the built in meter works for my DX949. Here is a basic instruction on how to adjust the SWR. When you adjust the SWR, you are not changing anything on the radio. You are actually

...adjust length. Either type you have it will need to be adjusted for proper length. Here is how to tune the antenna to lowest SWR. Some radios have a built in SWR meter. Some do not. If yours doesn't ...

...adjust the dial on the SWR meter until the needle of the meter is fully forward. Release the transmit button and change the switch on the swr meter to Reflected Power. Key the mic again and note how ...

...adjust the swr with the built in swr calibrator You can't adjust the SWR with the built in calibrator. The radio has a built in SWR tester but does not have an antenna tuner. Ideally you should tune ...

...adjust length. Either type you have it will need to be adjusted for proper length. Here is how to tune the antenna to lowest SWR. Some radios have a built in SWR meter. Some do not. If yours doesn't ...

...SWR is set by the antenna. It depends on the type of antenna you have as to the correct procedure. If the antenna has a stainless steel whip then a set screw is loosened so that the whip can be ...

...adjust length. Either type you have it will need to be adjusted for proper length. Here is how to tune the antenna to lowest SWR. Some radios have a built in SWR meter. Some do not. If yours doesn't ...

...swr each time you adjust the antenna. If your SWR reading is higher on channel 1, then your antenna is too short. You must make your antenna longer. Do this by loossening the collar and pulling the ...