NAD CI9060 Amplifier "clean pots" Questions

i need to clean the pots and check circuit board on kb300 amp Change the pots

NAD spare parts Hi I think the volume pot on my amp is faulty (lots of crackle when I turn it up or down, but not always in the same spot on the pot or all the time, prehaps it's something else??) ...

...clean channel.Verry scratchy.There is a number on the back but local electronics dude sais it does not help.Need oem part. Pots are essentially variable resistances and should have the Ohms value in ...

...pots and controls are very noisy and don't always work. Where can I take it to have the pots cleaned? this unit is over 30 years old, and I'd like to have it repaired/refurbished. You ...

...pots and switches drop out and are noisey. What is best way to clean the contacts in these without causing collateral damage? Which product is best for this purpose? Look for an electronics switch ...

...bypassed (tone) its fine which suggests that the problem is on the treble/bass pots or boards. Try cleaning all the pots with switch cleaner first (open the amp and spray it into the pots them

...pots and clean them out with tuners cleaner or some such product...a quick fix would be to rapidly move the knobs side to side or press the buttons or toggle the switches as fast as you can in hopes ...

...at full power but not be clean sound. the pots are clean for the channel and make no noise when turned. The pre amp. inside the amp. is burned. A local shop can most likely fix it for about

...including the Master volume knob. Thank you in advance Wayne Ramsay Sounds like it need a good clean. Google a demo on how to clean the pots if you're not sure on how to do it! Hope this

...contact cleaner and try spraying it into all switches and pots, and work them to clean the contacts. Also, check to see if there is static in a low-level output such as the one for a tape