NAD C350 2-Channel Amplifier "protective short circuit sony str" Questions

...have a short-circuit in your speaker cables (do you have pets?). To check, disconnect all speakers, then add one at a time until the problems appears. When it does, that's the speaker wire to

Short across the terminals of each capacitor for a few seconds to discharge them. They are like little batteries. If it isn't there already, mark the circuit board with which side is the "+" terminal,

...short circuit. protecter activated means one or more channels of the O/Pamp is short circuited(defective) in your amplifire . First of all Remove the Power cable from the Amplifier and make sure no ...

circuit.The protect works to prevent any further damage to the amp and is a safety feature. To look into the fault it is important to have an idea to go about. Disconnect the speakers and check if the

circuit. The fault could be failure or short in the output stages, short in the speakers, fault in the power ciicuit or the error amplifier that triggers the relay.To trace the fault it is impotant to