Panasonic CT-32G11 32" TV "drill problems" Questions

...the crt until there is no more distortion visible (usually 3-4 feet), then turn the gun off. Rigged Drill Method ( parts can fly off so take care) 1. Get a magnet and tape it to the end of a high RPM ...

...sink. Direction: cut the heat sink to size allowing room for a nylon nut. make as tall as possible. drill hole in center, but drilling only to its center, not through it.. Use nylon screw and nut ...

...has developed a degaussing problem now. Rainbow colors - magnets haven't helped neither has power drill placed near the screen. Is there a degauss button on this model or any other tips to solve ...

...pins, joined (soldered) the switch source lines & removed the unused NO pin so it would fit in the drill holes... works fine! C622 is the real problem. It is a 470 uf capacitor filtering the power

...will subside. When you turn the tv off, and try to put it back on, you have to repeat the above drill. Any suggestions? The tv is one year old. You first need to rplace the outlet if it sparks ...

...problems in the set. It can be the remote IR sensor module itself, or one of the buffer amplifier stages on the way to the uPC, or the uPC itself. In some models the buffer amp is built in to the IR ...

...they would charge to do the repair for you, it's not an expensive one. Most reliable shops know the drill on this unit. Bill JUST A SIMPLE THING TO TRY ... MAKE SURE YOUR TV IS SET TO STEREO AND NOT ...