Question about Panasonic TH Televison & Video
the front led flash 10 times and the tv no turn on the conector p10 have the 10v in pin #1. Change the P.A board resolve problem. try to buy in www.shopjimmy.com.. if the front led flash 10 times is a
Question about Panasonic TH Televison & Video
...the TV connection is routed thru DVD/VCR. Component Video Cable is used for connecting the DVD to TV. The P, PA, DH, H or DT board may be defective. Email for some help... Best regards ...
tv has sound but only colored vertical lines on screen Hello, All Plasma and LCD TV have boards that control vertical and horizontal output to their respective areas. They are connected to the screen ...
no picture last night my tv was fine and when i tried to turn it on this morning the screen is just black i am not understanding it? if someone could help i would reall appriaciate it hello, If ...
Question about Proview Televison & Video
turn tv on no picture everything else works. turn it off & on a few times maybe more and it comes on and stays on. what could be the problem thanks mike L Hello, If everything else works - there ...
BOARDS: Y-SUS, UP/LOW SCANS.LAST THING: IF FUSE IS OK, CHECK POWER SUPPLY FOR BLOATED CAPACITORS(BIGGEST BOARD IN A MIDDLE OF THE SET) SAME SERVICE POSITION. GOOD LUCK, LET ME KNOW HOW TI GOES. ALEX'S
i had my 42 inch orion plasma for about 1 year when i unplugged a camcorder from the s-video while still playing and about 10 horizontal lines appeared accross the top of the screen.now about another ...
Question about Proview Televison & Video
ProView has a bad cable connection. Other tvs hooked to the same cable don't I have hooked the tv up to 4 diffrent cables and the screen is still fuzzy. I used the same cables on another tv and it
...PA-32JK1A. When I plug in the TV, the orange standby light comes on like usual. When I turn on the TV (with the remote or the front panel) the blue power light will come on but all I see are a few (6 ...
...connecting power to Y-sustainer board, tho the left of the set, face down with back open, of course. If this motion will make set to stay on, here you're! replace the board and a scan converters as ...
409 questions posted
Usually answered in minutes!
174 Questions
154 Questions
131 Questions
120 Questions
95 Questions