Panasonic PT-47WX49 47" Rear Projection Television "tv reset surge" Questions

...reset button again and wait for it to stop flashing and attempt to turn it on again. If it doesn't work, unplug the TV, follow the same steps however, let it sit for 24 hours before plugging it back ...

...tv after a half hour unplgged and then plug in and turn on normally? sometimes it needs a reset time period before the fuses inside will reset themselves. Power outages cause havoc with electrical ...

...TV will not reset. Unlike the last time this happened, as long as I hold the reset button in the light stays out, however, as soon as I release the button the light start flashing again. Is there ...

TV was hit by the surge and it was protected by a surge protector, please follow this reset procedure. The STANDBY light will flash if an issue is detected within the television. This can sometimes be

...TV that I can reset or is the TV fried? there are several fusses in a hitachi located in the power board if your lucky one of them took the hit you can , or have atech look for you the gma type fuse ...

...reset the unit? Blinking green lite on front of unit. how many times does it blink and need make and model of tv set. mitsubishi ws-55613 gould plus series blinks all the time think it was hit by ...

...reset, your TV caught a power surge. Whenever a power outage occurs, quickly power off (or better, unplug) any/all computers, TVs, etc. that are not protected by surge-protection. As an electrician, ...

...tv was involved in a power surge. there wasnt a storm but the surge took out 2 of my tvs. the panisonic will not turn on the power button just flashes green when you try to turn it on and blinks red ...

...TV to shut down and flash like that. If you unplug it from the wall and let it sit for a minute and then plug it back in, it should reset itself. If that doesn't work it will probably have to be ...

...around the corner... Unplug the tv press power on and plug it back in. some of these units have a reset clearly marked on the back. connect direct to wall as the surge protector may now have