PANISONIC 51INCH HDTV MY TV TURNS OFF AFTER 8 SECOND WHAT COULD BE THE PROBELM. EMAIL ADDRESS [email protected] From what I understand its the convergance amplifiers. Good luck obtaining a service
Question about Panasonic Televison & Video
repair mannual for a 47inch panisonic 1080i hdtv You can get it at Encompass Parts Disturbution #1-800-638-3328.hope this helps
Question about Panasonic Televison & Video
How do I reset my lamp timer on a panasonic HDTV How do I reset my lamp timer on my panisonic HDTV viva model pt-50lc14-k go into menu.... and you will find lamp setting. reset it to zero hours
MY PANISONIC PROJECTION TV WENT BLANK AND WILL NOT REPOWER Does it appear as a 3D type inage? If so thats a convergence failure. Let me know the model number and I will post a link where you can get ...
my panisonic has the blue green and red is out of wack and cant fix it they say i need codes This sounds like convergence output IC problem. convergence board would have to be removed - remove and ...
red tube out!!!! My red tube in My Panisonic DLP has blowen and I was wondering if anyone could give me some advice? Is this a hard task to do manually and how much is it going to cost for one of ...
...one of the resisters needs replaced and I cannot read the OHMS. The #on the board is 7053.this is a panisonic 51hx41e TV. TAKE A GOOD LOOK AT THE RESISTOR; IF YOU SEE 2.2 PRINTED ON IT ----IT IS 2.2 ...
double vision I have a 47 " panisonic projection tv mod # pt-47wx53g it is showing a double image in red. I tried to set the converge on my remote but the red would not line up. will this be an ...
lost dvb channel accidently erased it.plasma panisonic TH-37PX60B Panasonic have been guiding me thankyou anyway.
BLUE AND YELLOW SHADOWS ON MY PANISONIC BLUE AND YELLOW SHADOWS ON EVERYTHING BUT THE VERY MIDDLE OF THE SCREEN The model listed uses two stk 392-110 convergence chips---colors seem skewed or even 3 d
331 questions posted
Usually answered in minutes!
627 Questions
462 Questions
520 Questions
406 Questions
457 Questions