Panasonic PT-50LC13 50" Rear Projection HDTV "tune button" Questions

tune it in manually as we're not sure how it can be done with an one for all universal remote. Any help to get the console working on the T.V. would be greatly appreciated. after you hook it up to the

cant retune my digtal freeview as my picture keeps freezing how do i retune my freeview as my picture keeps freezing The retuning process is as follows: Press the [i+] or MENU button on the remote ...

...tune in programmes I go to menu which brings up screen picture, audio, time but skips on tuning into progs and goes to options. Please help. Hi, Select TV as input source by TV remote or push Channel ...

...tune in to my bush tv You have have to use your input button on your tv remote until you get to your vcr. For instance some tvs will show on the screen component 1 for for cable, component 2 for your ...

...tune it with out the remote use the button's on the front of your tv or buy a universal remote it will help with some function's $5.00 anywhere or you can buy a refurb remote for $135.00 on the ...

Tuning in TV Cannot get the AV channel to tune in. Have a Hitachi C2144S. Just need to know what buttons on control to press as no longer have instruction manual. Ta usually [AVX]

tune, then the tv needs repair. If you need to switch from Air to Cable or Cable to Air and then Autoprogram, that would be in the menu. The model number does not appear in my Philips cross reference.

...tune the convergence cause in the center of the screen it's good but sides and corners are blurry. you will have to go in the service mode. be careful as you could damage the tv if wrong settings are ...

tune in the digital channals??? help!!! Hi. You havent listed your TV model but most Samsung sets that are digital will have A button on the remote marked DTV this will tell set to look at the digital

button panel. press menu then go to manual fine tune so you can program the channel one by one. you can use the volume up/down button to tuned the desired channel. to select channel use the channel up