Panasonic PT-50LC13 50" Rear Projection HDTV "remove words television" Questions

words they are alittle bit blurred. How do i fix that? theres a FOCUS adjustment button , but not sure if its located in the front or in the back of unit ( im more familiarized with TOSHIBA models ) .

how do i remove the word factory on the screen the word factory is appearing on the screen.how do i remove it? I have the link to the service manual but first I want you to try something, with set off

...words showing on the screen Try adjusting the convergence. If it won't move see below- (or hitting Magic Focus for some Hitachi?s) This sounds like convergence output IC problem. convergence board ...

I need to remove the base from my 42 inch plasma TV to mount it onto a TV stand. How do you remove the base? Good Day; The base is attached by four, inset, allen screws on the back of the unit, bottom

...words are repeated 3 times. I hit the back of the TV and the pic. and the wording were fine, then it went back to messed up after like 30 sec. What Wrong? Sounds like you have some solder problems on ...

...words at the bottom of screen run uphill.blue does not seem aligned to grid. magic focus did not correct. Can align red and green manually but not blue. The IC /resistor in convergence circuit(blue) ...

...words a terrible picture). Please help. This sounds like convergence output IC problem. convergence board would have to be removed - remove and replace 2 STK IC's and check the surrounding resistors. ...

...word "satellite" is displayed in the top left corner and wont go away...what do I do to remove this? This may sound too simple but lets start with the basics. Have you tried pushing the ...

...words, etc not exactly in focus, 3-D like effect... How difficult is it to remove the circuit board to replace the chips/resistors? Any chances of getting shocked? Thanks! Replace both STKs Use StK ...