Panasonic PT-53WX54 53" Rear Projection HDTV "lamp ballast" Questions

...lamp ballast baord. Replace the lamp ballast board first. Because, it there is any internal winding short in the inverter transformar of the ballast board this type of fault can occur. you have to ...

...no ballast start, ballast is suspect. Note: Lamp may arc but not start. Pin 5 of BT251 is "LAMP LIT" and goes to 1.48V when lamp is lit. If ballast strikes lamp but lamp won?t stay lit, suspect

...BALLAST LAMP FOR 62HM95 Ballast Board Powers Lamp, the 2 plugs on Lamp connect into Ballast board just follow the wires from where lamp plugs into. Does Ballast have a ark coming from a componet on ...

...LAMP BALLAST BLOCK (Fig.6) • Remove the LAMP COVER. • Remove the BODY COVER. • Remove the BODY BRACKET. • Remove the MAIN UNIT. (1) Remove the 2 screws [H]. (2) Remove the LAMP BALLAST DUCT. (3) ...

...the ballast trying to power up the lamp. The ballast is on the other side of the lamp compartment. the lamp plugs into the two short leads that are attached to the ballast. Its a small circuit

...lamp OR the ballast OR the thermal fuse unit on top of the lamp house. Change the lamp if it keeps up have a tech check the ballast. CAUTION - Do not play around with a ballast unit if you don't ...

...ballast or lamp ballast to locate the part and its number.  Usually the color wheel will not operate if ballast is not working---Lamp comes on and stays on the Ballast is good. BP47-00027A this ...

...the lamp - if it is weak, it will not supply enough power and lamp shuts down. Bought a new ballast on Amazon for $62.00 - problem solved. I also tried a cooling fan - NOT the problem, was the ...

lamp, the ballast needs to send some High Pulses of Voltage, as high as 15 kV (that is the constant clicking sound that you are hearing). In order to resolve this you need to change the Ballast Board.