Panasonic PT-50DL54 50" Rear Projection HDTV-Ready Television "dlp blue red green" Questions

...DLP TV: the red green and blue colors dont align properly... The red green and blue colors dont align properly Your convergence is out. If it's just out a little, you can adjust with your remote or ...

...dlp hd tv. Only blue and green colors show on hd component input for charter hd cable box. Are there any internal adjustments that need to be made through either the tv menu or the cable box menu? ...

...blue,green and red that create the image ,when they start to fail color discoloration will occur.If it's an Dlp pay attention to sounds of buzzing,whirling and high pitch sounds because it could be ...

...blue and yellow shades. Your TV is a DLP one lamp does it all, not like the old projection TVs with the Red, Green & Blue CRTs. Your TV may have a bad light engine or lose cable connections. Good ...

...is the problem by dissassembling the unit to the point where you can view the face of the CRT's (red green and blue) directly. Phillips HDTV 52in. It has blue green shadows. Picture bows top and ...

...not show any reds. The faces are green and some objects are blue or blue green. Check for good connection from cable to TV , connection is good, check for a bad mother board TV board needs ...

...do manually and how much is it going to cost for one of those lamps? Your TV is not DLP it is projection it has 3 tubes RED /GREEN /BLUE cost of new tube $500.00 used if you can find one maybe ...

...DLP can have a convergence problem, but the blue portion of the image is shifted to the left by about 3 inches, and the blue image is a little shakey. However, the red and green images are perfectly ...

...DLP devices look ok as far as I can tell. inside the light engine there is a red a green and a blue glass color filter.The heat from the lamp causes the color to burn off the glass.You need new ...

...blue shadows For CRT projection TV's, this indicates that the Green picture tube is burned (warn out). The less green that strikes the screen, the more redish the image will look. You will need to ...