Panasonic NV-HD680 VCR "display code" Questions

...display HO1 fault code. Can anyone tell me what the codes are, and whether the fault is likley to require the services of a Panasonic engineer? most of no signal means dsr 11 or similar machines have ...

...display and you will get an error code on the monitor, for instance, C:21:00 error code (the most common code I get) indicates a condensation problem. If this is the code you get then leave the unit ...

...Time Code? Our dubhouse SAYS they sent us U-Matic dubs with SMPTE time code. The time code is not displaying on the internal reader. When I plug in a time code reader to the TIMECODE OUT port, I

fault code H01 appears in the display as above and nothing at all happens You appear to have a pansonic K Mech model. H01 is the code for no drum motor or drive.

...code 3140 (self diagnostic) How do I defeat this? Always look for a tiny hole (in the back) that reads RESET. If none exists, maybe a push on a DISPLAY button? Try combinations (pressing ...

...code RF22 appearing? Could you please tell me what these codes mean. I have a teac MV-6092 which displays error 'RF 26' also, any help would be appreciated If u dont have a remote for these, it is ...

...code on display, VCR shuts down and displays this message. You have a K Deck Mechanism and F04 means that it is locking (getting stuck) unloading. The cause of this is the Load Motor timing. If you ...

...CODE FOR MY Aiwa VCR HVFX5500 hi , Try... Power on, Press both CH/UP key and REC/OTR key for more than 2 seconds, OK will appear in the display panel. or try Press CH DOWN key on VCR while pressing ...

i do not want any display during recording how can turn time code off If you have a DISPLAY button on your remote, repeatedly pressing it will go through the different displays.

...code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name ...