Panasonic NV-FJ620 VHS/S-VHS playback VCR "turns insert tape" Questions

...insert tape When I turn the VCR on and insert a tape, after about 2 or 3 seconds ir reads "err" and shuts down...Upon turning it on again it ejects the tape... Hi. your VCR is experiencing a major ...

...comes out if tape armes move out towards head then turn other way Open the cover,plug it in, both sides of the tape port tape insert have sesor,touch the sides,touch the sensors tape will come

...tape did not fully insert. An error message "F06" appears on the display, and it will not let me do anything, including ejecting the tape. There is nothing in the manual referring to this problem. I ...

...insert a tape. It keeps rejecting it. you posted 2 different problems here... to answer this one ". The tape is stuck, won't eject and I'd like to get it out without damaging the VCR unit."...open ...

turns itself off within 10 seconds of turning the power on. Any suggestions what I can do to fix this problem. You need the aligniament the eject gears to tape gears.Please remove the cover platen and

My vcr won't play a tape. I turn it on and it ejects the tape. I put the tape in and it shuts off. What's wrong? your vcr must see the tape that has been inserted this is accompilished by three small ...

...INSERT A TAPE WHEN POWER IS TURNED ON CAN NOT INSERT A TAPE. WHEN POWER IS TURNED ON E3 01 APPEARS ON THE SCREEN. Sony VCRs have shown these error codes for years whenever a problem occurs but it ...

Power problems on VCR After placing a cassette in the unit, the power is shut off after about 10 seconds. Also, I have noticed the ejection of the cassette is difficult. Sometimes it ejects on command

VCR Lock Activated message appears when I hit Play. Why and how do I get rid of it so I can play a tape? To turn on, hold down REC on the VCR in Stop mode with no tape inserted for 7 sec. (Please ...

...insert a tape. Any suggestions? Thank you Error 02-403 is "tape slack in ff/rew". Although you were able to get the tape out, the threading ring may not have returned to the unthread position. With ...