...or bad electrolytic capacitors in the display power supply. "no power" is probably a bad 12 volt regulator on the main board. the main power supply is working as evidenced by the display lighting
...power shut down: I replaced C1250 (680 uF/25V) and C1260 (1200 uF/10V) and after that is was working perfaect again. There cannot be any reason pin pointed for a Electronics Equipment failure. But ...
Question about Sony Televison & Video
Does a Sony PVW 2600 require a propietary power cable? I've got a 2600 and 2800 that won't power up. Can I use the same type of power cable that I would on a computer or is it special? yes - the power
No power There is no power when I turn on my VCR. Is it plugged in?? When was the last time you used it?? Did this happen after a storm?? What make and model of vcr?? How old is it?? We need more info
Question about Sharp Televison & Video
flashing (intermittent) display [--:--] no full power up The display flashes 2-3 times then blank for aprox 1 count then repeats. The display shows - - : - - only. I have tried to reset by unplugging ...
...but when i put a cassettee inside it power is shut. i cannot rewind, play or forward a cassette. in all the cases power is tripped. unplug for 10 minutes then replug the cord and see it working ...
Question about Panasonic Televison & Video
AG-DV1000P that powers off when tape is put in. I wanted to know if anyone can help me out. I have a AG-DV1000P mini DV deck. A problem just started with it when if I put an MiniDV tape in (even new ...
Question about Televison & Video
...working fine before the power outage. The technician at the cable company tried to help figure out what to do, but nothing worked. Have no way of programming the vcr. Hate to say this, but when power ...
Question about Sanyo Televison & Video
...working great one day, then 6mo. later when I went to use it again - it wouldn't turn on. Its like there's no power. When you try switching on, there's no momentary display flash, no blink, nothing. ...
...advise. held down for extended time. gave up and then safe went off and vcr working. thanks i held down the power button for a few minutes, and all of a sudden it kick on and it works fine
49 questions posted
Usually answered in minutes!
627 Questions
462 Questions
520 Questions
406 Questions
457 Questions