Panasonic SA-HE7 Receiver "amplifier bose 901" Questions

bose 901 to yamaha htr -6090 Sorry, it doesnt look like you can hook up an external EQ while still using the amplifier section of the yamaha. Instead, You would have to use the preamp out to go to 901

amplifier inputs of the Bose equalizer. On the separate amp I connect the Bose 901s and run RCA cable from the inputs to the amplifier outputs in the Bose equalizer? Does that sound correct? If so, my

...Bose 901 speakers series 5 along with its equalizer. Is the Onkyo tx-8555 compatible? What else do I need to get it up and running? My suggestion is do not hook the 901's directly to the Onkyo. It is ...

bose 901 speakers.only 2 speakers..i have no center and surround.. The protect message appears when the current powering an amplifier inside the receiver goes beyond the safety limit or the amplifiers

...bose is there going to be any problem hooking up the active eq for the 901s? Yup, theBose 901's need their own amplifier dedicated. Get yourself a nice Carver M-100T or M400 Cube and run 'em off the ...

Bose Equalizer without using a Amplifier? The short answer is no. The more useful answer is: The EQ is designed so that the 901s reproduce the correct sound levels throughout hte audio spectrum. Given

...Bose EQ Amplier OUT >>> new amplifier IN. Attach the 901's to the new amp, set its volume to Max and run through your receiver's speaker level setup. *** If you use a Tape or VCR Out you will NOT be ...

...me to hook up the Bose EQ into the Marantz? Thank you very much. Hook, yes. Use with NON-Bose 901 speakers, NO. The 901's need a dedicated amplifier. Get one, then use the L/R Pre-Outs to feed

...Bose 901 speakers to the VSX and use them as my front speakers powered by a separate amplifier but can't find an appropriate pre-out from the VSX.......what analog VSX output can be used? thanx..... ...

...Bose EQ Amplier OUT >>> new amplifier IN. Attach the 901's to the new amp, set its volume to Max and run through your receivers speaker level setup. *** In either case you will NOT be able to SELECT ...