...my sony explode stereo say offset When the amplifier shows an offset fault, it's generally because there is DC voltage present on the speaker terminals. The amp has shut down to protect the
...isnt hitting when i turn the truck off then back on it hits for a little bit but when i turn the stereo past 15 it cuts off ya i would say its not grounded right Or the ohms I had a 4 ohm ...
Question about Infinity Car Audio & Video
...bridge mono or operate the amp in stereo mode) if you are running say a 1ohm load on a 2ohm stable amp it will keep going into protect or even pop your fuses do you know what your subs are wired
...knows what they are doing, if you have your speaker loading correct. This person might not be a car stereo installer as sometimes they don't know how to load an amp correctly, especilly when it comes ...
...might not be getting enough power, check your settings on the amp, gain output make sure it in stereo and not mono and check your crossover, or ...
...protect it from unexpected impacts. Now snake the wire either under the car (easiest, just zippie tie it up and stay clear of wheel wells) or thru a firewall into the interior. If you go thru the ...
...bass. I have a 4,000 watts amp at home, I don't use it in my car. I got it rigged up as a house stereo. I bought it for a 100 bucks broken, and fixed it. I have worked with hundreds of car amps a ...
Question about Kenwood Car Audio & Video
...stereo and it is stuck in the protect mode. I followed the instructions the best I can. Any help would be wonderful. I bought a car with this radio in it and I have tried everything that the manual ...
15 questions posted
Usually answered in minutes!
217 Questions
156 Questions
152 Questions
73 Questions
53 Questions