Sony XM-2165GTX Car Audio Amplifier "rewiring sub" Questions

I am getting power but there is no sound from the subs. Wiring harness is correct but when you touch the amp with a screw driver or anything metal it sparks. Okay well it sounds like you need to ...

my xploid amp blows the fuses in the amp if my subs hit to hard and i dont know why? It sounds like you have the levels improperly matched or the wiring to the sub woofers making an improper impedance

my subs are piggyback and i want to know if i can hook up to this amp without rewiring my subs i have one output and i don't see a bridge on this amo its a mono amp but i have never seen this type

cut out I just got a kicker zx400.1 and kicker comp 12s every time i turn the radio up between 23 and 27 the amp shuts down and then it comes back on but it keeps doing it till i turn it down ..... so

...with my 12' subs but it was simply a matter of my rca jacks but sense you have checked them try rewiring the speakers if that does not work then your rca module may be burned out within the ...

I have an alpine mrd-m1001 getting curr message ho do you reset the amp Hello deeprajm, Shorted or low impedance outputs can cause the "CUR" display. Power down everything and remove the speaker wires

amp turns off the amp has two lights a green when its on and a red one when i turn it up not that much it turns red and stops the subs they are ma audio when i connect one it works fine. Sounds like ...

i have a PHOENIX GOLD RYVAL V1502 amplifier and trying to hook it up at 2 ohms as it describes it can be 450watts x2 at 2 ohms running wires from bridged positive and negative to the first sub then ...

...rewiring, bridging the subs etc, finally we tried another Sub, a 12" sony sub and it wouldn't blow any fuses but there wouldn't be any power going to the sony sub, unless we played around with the ...

amp not working blue light is on? You more than likely have subwoofer(s) wired too low for the amp. It's only stable down to 2 Ohms. You should rewire the sub(s) so that the amp will "see" a 4 or ...