Sony XM-2150GSX Car Audio Amplifier "xplod head unit wiring" Questions

...xplod amp in my car. Phono leads connect to the output terminals on the back of your head unit, Then connect to the input terminals on your amp. The remote wire connects to the amp remote wire behind ...

...xplod amp xm-1652z high level input connection what do i connect to the high level input connector wires? is it the front right and rear right to one pair and left front and left rear to the other? ...

...xplod head unit model is cdx-gt260 Power wires are as follows - Red = Switched power (ACC) Yellow = Constant power Black = Ground Thanks for using FixYa - a FixYa rating is appreciated for taking the ...

...xplod head unit stops responding when remote wire is plugged in what does that mean? i have a 1800 watt amp and the light is not turning on. this is a new amp str8 out of the box. my sony xplod head ...

...Xplod CDX-F5700? I do not know of any amplifiers with the number your calling for here but i do know of some head units. Your tweeter wires should hook up right with your mid-range wires. They can ...

a_car_amp/how_to_install_a_car_amp.htm this will instruct the wiring process. Also most any aftermarket amp will run with any aftermarket headunit, so long as the head unit has RCA outputs, enjoy.....

...especially the "remote" turn on from the stereo? This wire is usually a small gauge "blue" wire coming from your head unit. When you turn on the head unit it will remotely power on the

...head unit to a xplod amp in a 2002 mercury cougar. i just need to know how to connect to batter wire ground wire and remote wire I would recommend using an 8 AWG minimum or preferably 4 AWG power and ...

...Xplod XM-Z1852). It works fine until I start driving above about 5mph. Then it cuts on and off, but the protect/power light doesn't change. I will usually hit the first part of a note and then stop. ...

...xplod 52wx4? If you mean the "remote turn on" lead, you should connect this to a 12 volt remote turn on lead from your head unit or you can wire it to a 12 volt source that turns on when the key is ...