...clutch to "drill" position - this will switch off torque limiter. If problem persits, check the clutch. Mains powered hammer drill or pneumatic hammer - did it work fine it the past? What diameter of ...
clutch is stuck on drill mode but when using the drill with a unibit or such, instead of the drill bogging down and just stopping, the clutch kicks in while set to drill mode. drill needs transmission
drill works ok but cannot turn the dial to the hammer action. it stops at the 21 setting and will not turn any further.Pls can you help Fred. the problem is the metal part of the clutch that meets the
clutch slips reguardless of setting, in both drill and hammer mode. won't drill. is this a transmittion problem? You can get the part replaced with metal gearing and clutch and that shouldn't happen ...
...drill. could be a couple problems, is the switch selector fully engaged in hi/low and is the clutch seting set for the proper torque.If both OK then I would have to think that you need a new clutch ...
clutch went out on my Madita cordless driver drill 12 volt whare can I get it fixed?? I dont know where you live but there should be a local industrial distributor aroung and they usuall always have a
...CLUTCH DRILL MOTOR FOR CORE BIT SYSTEM CLUTCH SEEMS TO BE SLIPPING THIS IS SECOND DRILL MOTOR TO DO SAME PROBLEM AFTER OMLY ONE OR NOT EVEN ONE HOLE MABE THE TORQ OF THE DRILL IS NOT POWERFULL ENUGH ...
Question about Dewalt Drills
dewalt 18v xrp clutch slipping and electrical smoke smell in rear can i replace the clutch, and would the brushes cause the smoke smell Yes you can. Depending on the model of the tool it may not be ...
clutch problem on drill?? when i push in the trigger on my cordless drill the motor turns but not the chuck...i am thinking my clutchs are bad?? is that expensive to replace...the drill is a Milwakee ...
...clutch started to slip awhile ago and now at the present time it will only torque under low speed in drill AND drive mode. Brushes are good and well above the limit mark. Wondering what the possible ...
5 questions posted
Usually answered in minutes!
227 Questions
165 Questions
118 Questions
74 Questions