Craftsman 2700 PSI,2.3 GPM Briggs & Stratton Powered Pressure Washer - Ca. Model "stuck float carburetor pressure washer" Questions

...empty gas tank see gas leaking from carburetor YOU HAVE A FLOAT IN THE CARBURETOR THAT MAY BE STUCK THERE IS A SMALL NEEDLE VAULE THAT ALSO MAY BE STICKING YOU CAN GET A REBUILT KIT FOR THE ...

...and oil. That's it!Take your time and you can do it just fine.Re-post if you have any more troubles. The carby needle float is stuck open. Remove float bowl and gently release needle and

float is stuck. Try beating on it. (#28 in the picture) DO NOT TAKE APART CARBURETOR! If that doesn't help might be something else. Electric: Was it left out in the cold in the winter with water still

...float is stuck open, which would explain the flooding, the white smoke, and the gas coming out of the exhaust. Sounds like you may have gotten a faulty carburetor. If you can, I would return it where ...

...float may be stuck in the up position - pressing the needle into the seat. What ever little gas is in the bowl is quickly used and it stalls. Check out this page for carburetor cleaning / rebuilding ...

...float stuck. Try putting dose of carburetor cleaner through engine and cycle choke lever and engine speed lever back and forth while engine is running after it has warmed up without running water ...

float in the carburetor and now half of it is stuck in there how can i remove it? i was trying to clean out my carburetor of my pressure washer figuring that may of been the problem for it not turning

Gasoline is leaking out of the side air filter float valve in carburetor stuck.

float is not stuck. Use your finger to lift it up and down a couple times. Don't force it either direction. Just a little pressure should loosen it if it is stuck. Put some fuel injection/carb cleaner

...I would say the float is stuck down. need to pull the bowl off the carb and inspect for gummed up pieces. If nothing take the float out and inspect needle and seat make sure they are clear of