Sony DVP-NC665P/S Multi-disc DVD Player "player fuse" Questions

...I heard a loud pop from the player. Opened cover and fuse had blown (1.6A 125V). Replaced with 2A 200V fuse and it blew right when player plugged in 2X. Did lightening ruin it? Unfortunately yes

...try to chang the fuse fuse is bult in side the dvd player in power supply but as per standared if the fuse is burnt then please check this in nearst sony service centre may be more parts are ...

...FUSE RISK BURNING UP THE DVD PLAYER OR IT CATCHING ON FIRE DOESN'T IT? THANKS you can get fuses from almost any electrical shop, just take the blown fuse with you, give it to the shopkeeper and ask ...

fuse in my memorex dvd player and it keeps blowing the fuses this is because there is a more major problem than just a fuse i'm affraid the fuse is blowing,trying to save components but the more times

...fuse does the Denon 3910ci player use? It says "2A" stamped on the circuit board but the engraving on the fuse in use looks more like .2A. Probably a dumb question since I have never see a .2A ...

...player in a 2004 Chrysler Pacifica gets no power. You have a aux fuse you need to check first.. If the fuse is blow , replace it would be your first thing to check. The fuses should be on drives side ...

...PLAYER THE FUSE IN SIDE KEEPS BLOWING I WENT OUT AND BOUGHT THE SAME FUSES BUT STILL HAVE THE SAME PROBLEM Depending on the model most LG dvd players use SMPS Power Supply (Switch Mode) when a fuse ...

...fuse keeps blowing I purchased the Polaroid 7" Two-Screen Dvd Player today. Every time I plug the car adapter in to my 12v outlet it blows. I tried a new 2amp fuse and a new 2amp slow blow fuse. Do ...

...fuse in mains cable plug first, if good open up dvd player, there should be 4 screws on the side and 4 at the back, once undone gently lift the metal caseing upwards and towards you when facing the ...

player states it's a 9-12V so I am using a 1Amp Fuse and have the DC Adapter set at 9V. What am I doing wrong? It blows in a matter of minutes. Isn't the 1 amp fuse too small? Usually 12 volt operated