Sony KV-27FV16 TV "crt 5 blinks" Questions

Ad

...blinks 5 times My Sony trinitron kv36fs17 lost its colors. The red LED blinks 5 times then pauses and blinks 5 times again. The blinking goes on for ever. Check the HOT and resolder H. drive ...

Ad

...or sound - Stand By Light blinks 5 times (pause) 5 blinks, etc. Any suggestions / help? 5 Blinks usually means the horozontal circuit has problems and parts need to be replaced. unplug power to ...

Ad

Question about Sony Televison & Video

1 Answer

5 times, Diagnosis: White balance failure (Not balanced) Possible causes: Video out (IC7101, 7201, 7301) is faulty (CR, CG, CB board), CRT drive (IC309) is faulty (A board), G2 is improperly adjusted.

Question about LG Televison & Video

1 Answer

...blinks 5 times plug in......power light solid red......push channel up.....power light blinks 60 times....... then lamp light blinks 5 times. The lamp might be at the end of its life. Change the

Question about Sony Televison & Video

1 Answer

...A Dissabled Senior Citizen 5 LED flashes is a CRT drive problem (IKR) CRT is poorly set G2 volts wrong or the CRT is exuasted. Either way you need an engineer and an estimate on the cost of

Question about Sony Televison & Video

1 Answer

... standby light was blinking 5 times then paused for couple of seconds, unplugged tv overnight and now it is blinking 5 times pauses for a second and blinks 3 more times can you recheck the model ...

Question about Sony Televison & Video

1 Answer

5 blinks I get a series of 5 blinks pause five blinks.... The tv volume will not work, I am not able to change the channel and it will not turn off Plug it out wait a few minutes plug it back in and ...

Question about Sony Televison & Video

1 Answer

...CRT if it has failed? I can confirm that 5 blinks of the led means "unable to set grey scale" and I expect the software can no longer cope with the error. You could try boosting the tube with a tube ...

Question about Sony Televison & Video

1 Answer

...5( 5 blinks then 5 blinks) is indicating AKB, TOO LOW or ABSENT beam current. Meaning the tube has gone bad. You will need to replace the tube. I am sorry for the bad news. hope that doesnt hurt my ...

Question about Sony Televison & Video

1 Answer

...5 times then stops, on and on and on......I unpluged it to reset like the manual say but it didn't work The video output IC on the board on back of CRT is bad or there isn't 200VDC supply for

Not finding what you are looking for?
Sony KV-27FV16 TV Logo

26 questions posted

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76099 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...