Sony FD Trinitron WEGA KD-34XBR2 34" TV "power takes time" Questions

power on the set, It takes a long time to start (no sound or picture). The problem in smps or in feed back, check electrolytic caps. in the smps. 100microfards/50volts ,47micr/50 volts 2 nos, then o/p

...going on behind the scenes. Some times it starts after just 20-30 Minutes and sometimes it takes longer. Ur power ic converter board it bad so it Flyback transformer.Matter of time all power will

...part(s) should I check/replace? Thanks in advance. my sony 27" takes a very long time to power on, when it is turn on it works just fine, please tell me what is causing it to take so long to power ...

...power, it then blinks 7 times. We just tried again - and this time its blinking 4 times repeatedly. 30 YR SERVICE TECH. YOUR UNIT IS EXPERIENCING A POWER SUPPLY FAILURE.(INTERNALLY) TAKE TO A SONY ...

no picture or sound turn power on. power light blinks several times but no picture, sound, nothing! power light stays on but no response to remote or buttons on tv. have to unplug to turn power off ...

...power supply section, the horizontal circuitry or both. Or there could be more subtle thermal problems with parts so they don't start working correctly until they warm up a little. Unfortunately, ...

time to start.??? Is it capacitor of power supply pronblem? Hi, Yes it could be the capacitors. Commonly the damaged capacitors can check it visually. It will dented or deformed. But please check also

...takes forever for any picture to come (20 minutes) and even then it is very very dark. When you power it on, the power light flashes 3-4 times. sound comes on immediately. Any help would be greatly ...

...switching off - stays on for a little while then powers off to standby mode !!! it is a power supply failure in your tv. it is not major problem. can be ractified without taking much time. good ...

...power cable inside , normally it goes where the main switch is located and there you should find a Time Fuse normally the value is around 2.5 amps T for time it should say on circuit board & on ...