Sony KP-53HS10 TV "110" Questions

this tv has 110-245v do i need a converter to make it turn on toshiba model # 329p8m that tv has minimum-110 to 245 max, the power supply shoud be switched mode. there for any voltage from 110-245 it ...

...EVERY SO OFTEN IN RIGHT HAND CORNER OF THE SCREEN IN MY 230 CHANNEL TOSHIBA KIT WHEN IT IS ON THE 110 VOLTS IS OK. BUT AFTER FEW SECONDS ITS 110 VOLTS BECOME ABOUT 91 VOLTS.WHEN THE VERTICAL SUPPLY ...

...says your model uses the STK393-110 convergence chip. Another site I looked at said that was a 6 channel amplifier so I'm guessing ...

...Replace both of the Convergence ICs, they are Big Black ICs and will have PN# on them. STK392-110 ,also check the pico fuses in front and back of ICs they will look like resistors only they are ...

...error codes I took my Emerson 40" HDTV LCD 1080p to India.I connect my TV with an AC adopter 220 to 110.Now the input power supply is 110 V AC.The TV is not functioning.I heard tic tic sound,no ...

...power fuse ok hot ok lightning strike did you check that you are receiving a good hot (a consistent 110 ac) check the tv on a different outlet otherwise the chassis board has malfunctioned inside the ...

...relocating it to a different power source. like a different room. problem could be small drop in 110 voltage. like when your refrigerator comes on or your air conditioner comes on. they could be

convergence color is not converting Replace convergence IC (location 8c01) which is a STK-393-110. You will need to order an after market market convergence IC (STK 393-110) I have had good luck with ...

110 voltage is missing 110 voltage supply diode is open that diode number is missing i want that diode number Check and replace damaged component/s at its horizontal scan output section circuit. Check

...board out and changed the convergence ic's when we put it back in and turned it on it goes from 110 volts to 0 every time you turn it on .what have we done wrong we took the board out and changed ...